|
Round body, plain, flat head
Types 233 01 open and 233 21 closed
| Advantages:
- high crimping force
- screw length can be varied (open end)
- splash-proof (closed end)
|
|
Round body, linear knurls in grip range, flat head
Types 233 07 open and 233 27 closed
| Advantages:
- improved turning resistance
- suitable for soft components (aluminium, plastic,…)
- high crimping force
- screw length can be varied (open end)
- splash-proof (close end)
|
 | |
| |
Round body, plain, countersunk head
Types 233 11 open and 233 31 closed
| Advantages:
- very small head projection
- high crimping force
- screw length can be varied (open end)
- splash-proof (closed end)
|
|
Round body, plain, extra-small countersunk head
Type 343 01 for holes with imperial dimensions
| Advantages:
- very small head projection without countersinking
- screw length can be varied
|
|
Round body, linear knurls in grip range, countersunk head
Types 233 17 open and 233 37 closed
| Advantages:
- improved turning resistance
- suitable for soft components (aluminium, plastic,…)
- very small head projection
- high crimping force
- screw length can be varied (open end)
- splash-proof (close end)
|
| |
| |
Hexagonal body, flat head
Types 233 41 open and 233 51 closed
| Advantages:
- very high turning resistance
- suitable for soft components (aluminium, plastic,…)
- high crimping force
- screw length can be varied (open end)
- splash-proof (close end)
|
| |
| |
Hexagonal body, extra-small countersunk head
Types 343 41 open and 343 51 closed
for holes with imperial dimensions
| Advantages:
- very high turning resistance
- suitable for soft components (aluminium, plastic,…)
- very small head projection without countersinking
- screw length can be varied (open end)
- splash-proof (close end)
|
|
Type 343 21 for holes with imperial dimensions
Where possible we recommend the use of RIVNUT® EZ for holes with imperial dimensions.
| Advantages:
- very high turning resistance
- suitable for soft components (aluminium, plastic,…)
- very small head projection without countersinking
- high corrosion resistance
- screw length can be varied
|
